humimeter FLH Hop & Hemp Meter

Description

Ensure the quality of your hop or hemp harvest by determining the optimal water content, because only natural products that are even and not over-dried bring the highest yield. With the humimeter FLH from the Schaller company, hop moisture and hemp moisture are measured in a matter of seconds. In addition, this hop moisture meter also determines the temperature of the hops. The device is also perfect for measuring medicinal cannabis flowers and hemp flowers.

Areas of Application:
The marijuana moisture tester is suitable for measuring:

of loose and pressed hops
Hemp, hemp flowers, CBD flowers, cannabis, marijuana
herbs such as peppermint
of hay and straw moisture
Humidity in the kiln and in the conditioning chamber
Equilibrium humidity as well as for temperature and climate data long-term recording

Different sensors can be connected to the basic device, which can also be retrofitted at any time.

Advantages

Different sensors can be selected separately
Long-term stable humidity and temperature sensors
Easy data storage on the portable moisture meter
A high-performance series of hand-held measuring devices for moisture measurement with innovative sensor technology
Menu language in English, German, French, Italian, Spanish, Russian and many more on request

Technical Data

Measuring range	4 to 40% water content (depending on the characteristic)
Resolution	0.1% water content
Calibration accuracy to reference material	+/- 0.5%
Temperature measuring range	-15 to +85 °C \| 5 to 185 °F (only measuring tip)
Measurement result	Within seconds
Memory function	Hold function, datalog for 10.000 logs with measuring point report
Power supply	4 x 1.5 Volt AA alkaline batteries
Power consumption	60 mA (with display lighting)
Dimensions	145 x 65 x 27 mm \| 5.71 x 2.56 x 1.06 in
Weight	250 g \| 0.55 lbs
Menu languages	English, German, Italian, French, Spanish, Portuguese, Czech, Polish, Russian, International

Additional Notes

Stefanie Gsöls

Sales

Do you have any questions about our products? I would be happy to advise you personally!

Contact

Handling and measuring process

Switch on your measuring device and connect one of the sensors to the evaluation device – the available characteristic curves for the respective sensor are immediately shown on the display.
You can choose from the following sensors: cone sensor for measuring loose cones, lance for measuring in the pressed bale, infrared sensor for non-contact temperature measurement of the hops, air humidity and temperature sensor for measuring the hop equilibrium moisture content in the conditioning and for measuring the relative humidity, e.g. of the exhaust air during the drying process.

Cone and flower sensor:
Fill the measuring chamber with loose cones or flowers and compress the cones using the compression device. Water content and temperature are immediately shown on the display.

Insertion probe:
Stick the lance into the bale and you can immediately see the water content and the temperature of the bale
read the display. (The shell can be pierced with a lance.) The measurement results can be saved using a data logger.

Infrared sensor: Point the non-contact infrared sensor towards the material – the display immediately shows the current temperature.

humidity sensor: The following characteristic curves are available for selection: relative humidity, UGL hops (equilibrium humidity) and absolute humidity. The current temperature and humidity or water content can be read from the display and saved manually or automatically at adjustable intervals.

Support

Stefanie Gsöls

Sales

"We are here for you! It doesnt matter whether you have questions about the measurement process, calibration, accessories or technology, were happy to help personally!"